How To Program Your Entone Remote To Your TV (Gen 1 Silver Remote)








  • Turn on TV
  • Press and release the “TV” button on the remote.Press and hold the “SETUP” button for 5 seconds. Release the “SETUP” button. (The “TV” button on the remote should now be illuminated.)
  • Press and release the “POWER” button on the remote. Aim the remote at the TV then press and release the “CHANNEL UP” button. This will start the auto-scan mode. (While in the auto-scan mode, the “TV” button on the remote will blink every 5 seconds as it tries to turn the TV off.)
  • When the TV turns off you have 5 seconds to press and release the “OK” button on the remote to lock in the code for your TV. (The “TV” button on the remote will blink twice.) Your TV is now programmed into your remote.
  • NOTE: If the “TV” button stops blinking, and the TV did not turn off then the remote does not have a valid code for your TV and you will have to use your original remote that came with your TV to run the volume and power the TV on and off.

How To Program Your Entone Remote To Your TV (Gen 2 Black & Silver Remotes)









  • Turn on TV
  • Press and hold the “TV” button on the remote for 10 seconds. (The “TV” button on the remote should now be illuminated.)
  • Press and release the “POWER” button on the remote. Aim the remote at the TV then press and release the “CHANNEL UP” button. This will start the auto-scan mode. (While in the auto-scan mode, the “TV” button on the remote will blink every 5 seconds as it tries to turn the TV off.)
  • When the TV turns off you have 5 seconds to press and release the “OK” button on the remote to lock in the code for your TV. (The “TV” button on the remote will blink twice.) Your TV is now programmed into your remote.
  • NOTE: If the “TV” button stops blinking, and the TV did not turn off then the remote does not have a valid code for your TV and you will have to use your original remote that came with your TV to run the volume and power the TV on and off.

TV FAQ

How do I disable the Closed Caption on my Entone Set Top Box?

  • On the remote control for the Set Top Box press the “MENU” button
  • Use the arrow keys to move over to the "Settings" icon.
  • Press the "OK" button.
  • The STB will now ask you to enter a password.  Enter in the default password of 0000 then press the "OK" button.
  • Use the arrow keys to highlight "Hardware Settings" then press to "OK" button
  • Use the arrow keys to move the red highlight ring down to the “Closed Caption On” selection box.
  • Press the “OK” button on the remote. This will change the selection box to a blue color.
  • Now use the arrow keys to change the selection box to “On TV”.
  • Now press the “OK” button.
  • Then use the arrow keys to move the red highlight ring down to the blue “SUBMIT” selection box.
  • Now press the “OK” button on the remote. The TV screen should now display a “Data is submitted and saved” window.
  • Next press the “EXIT” button twice on the remote, and you are done.

   Lonsdale Telephone & Lonsdale Video Ventures

How To Program Your Entone Hydra Remote To Your Set Top Box










  • At the same time hold down the “OK” button on the front of the Set Top Box and hold down the “STB” button on the remote for 10 seconds.
  • Release both buttons. (The front display on the Set Top Box should read “RC REG”, and the “STB” button on the remote should be illuminated.)
  • Press and release the “STB” button on the remote. (Both the “STB” and the “AUX” buttons should be illuminated.)
  • Look at the back of the remote there is a number (1,2, or 3) on the battery cover. On the remote press and release the number button that corresponds with the number on the back of remote. (After the number button is pressed the display on the Set Top Box should now read the current time.)

How do I disable the Closed Caption on my Amino Set Top Box?

  • On the remote control for the Set Top Box press the “TITLES” button to turn Closed Caption on and off

How To Program Your Amino Remote To Your TV








  • Down load the user manual by clicking here.  Then find the four digit manufacturer code for your TV brand
  • Turn on TV
  • Press and hold both the 1 and 3 buttons at the same time on the remote control for approximately 3 seconds until the TV power button remains lit, then release both buttons.
  • Now enter the four digit manufacturer code for your TV set. On each digit entry the TV Power button will flash
  • Point the remote control at the TV set and press and hold the "TV Power Button" on the remote control.When the TV set turns off then release the "TV Power Button". (NOTE: it may take up to 5 minutes to find the code.)
  • Press and hold the "TEXT" button and then at the same time press the "Stop" button to finish setting up the TV.